Gauss Magneti Srl

  • Booth: 3509


Safety in handling

Profile

Gauss Magneti srl was founded in 1972, operating both lifting and separating magnetic devices, with 30 employees.

Gauss Magneti srl is a highly specialized company devoted to designing and manufacturing magnetic and vacuum equipment for material lifting and handling and devices for separation of materials.

Our magnetic systems are employed in the iron and steel industry (steel mills, rolling mills, scrap yards), bridge crane builders, shipyards and commercial seaports, foundries, ecology, energy, metal-working, and the wood, plastic and extractive industries.


 Press Releases

  • 2019 Gauss Magneti's participation to trade fairs:
    AISTech, David L. Lawrence Convention Center, Pittsburgh, PA, USA; 6-9 May 2019, level 1, stand 3509

    Made in Steel, fieramilano Rho, Milan, Italy; 14-16 May 2019

    Metec, Messe Düsseldorf, Düsseldorf, Germany; 25-29 June 2019, hall 04, stand 4D26

    K, Messe Düsseldorf, Düsseldorf, Germany; 16-23 October 2019, stand 11H36

    Ecomondo, Quartiere Fieristico di Rimini, Rimini, Italy; 5-8 November 2019, stand B1 034

  • Last Ecomondo exhibition, in Rimini, Italy, we presented a new product: battery powered circular electromagnets. They are sold with integrated battery and radio remote controller.

    Very useful for excavators or mobile cranes or other places without possibility to reach the mains.


 Products

  • Billet handling
    Electromagnets and electropermanent magnets for billet handling....

  • GAUSS MAGNETI designs and manufactures since 1972 special rectangular
    electromagnets for billets are designed according to the customer’s
    requirements for in-plant handling.
    They are mainly used for the following applications:
    • Billets unloading from cooling bed end (for hot material up
    to 650°C);
    • Loading and unloading of lorries, rail containers, ships;
    • Storage in warehouse or depots.
    Due to their design these magnets are suitable to operate at
    high temperature. In fact the special thermal insulation and
    the double bottom plate hamper that the heat from the load
    reaches the coil assuring then the highest electromagnets
    reliability.
    The particular coil design and the very low current density
    allow handling of billets and slabs at temperature up to
    650°C.
    In presence of billets layers with high displanarity,
    electromagnets with mobile poles are used in order to suit the
    load shape.
    The main advantages are:
    • Operators can stay away from the hot material avoiding risk of accidents;
    • Operators don’t have to climb over the piles to slinging the load
    dramatically increasing the handling safety level and reducing the cost
    of the personnel;
    • No damage to the material due to handling with mechanical
    lifting systems;
    • Faster handling speed with handling cost reduction;
    • Better use of the storage areas with the increasing the
    available space.
    The magnets can be used individually or combined under a
    beam.

    The electromagnets are fed:
    • From the mains through our electronic equipment with 4-quadrants
    digital converter allowing magnetic flux setting, counter-excitation for
    fast load release, coil temperature control by means of thermal probes or
    amperometric relays (important in high-temperature magnets),
    • In case of power failure, from lead or Ni-Cd batteries with automatic
    switching and charging system and continuous control of the battery charge
    condition.
    Gauss Magneti has also successfully developed the electropermanent magnets
    technology. Electropermanent magnets hold their magnetization also in case
    of mains failure or cable break, so they do not need buffer batteries or
    mechanical safety forks.
    Their peculiarity lies in that they are activated by a current pulse
    lasting few seconds and that they hold their magnetization till a
    second current pulse – opposite the first one – deactivate them.
    Beside the obvious advantage of handling safety, they also
    assure the highest reliability being actually exempt from
    internal Joule heating.
    Coming on the market of high performance magnetic
    materials has also allowed in electropermanent magnets
    a weight and dimensions reduction preserving the same
    capacity.
    Also for electropermanent magnets Gauss Magneti offers
    special versions able to handle high temperature materials (up
    to 600°C).
    They can be used individually or combined under a beam.
    Electro permanent combine the benefits of both electro and permanent
    magnet technology with the following advantage:
    • Safety: No accidental release of the load due to power failure or electric
    cable damage. They do not need buffer batteries or mechanical safety forks.
    • Performance: They also assure constant performances being actually exempt
    from internal Joule heating.
    • Reduced wear: Very low maintenance.
    • Environmentally friendly: No emergency batteries needed.
    03/13
    CISQ/CSQ 9190.GAUS - UNI EN ISO 9001:2000
    GAUSS MAGNETI SRL - Via S. Scaroni, 27 - 25131 FORNACI - BRESCIA - ITALY
    E-mail: info@gaussmagneti.it - www.gaussmagneti.it
    DIVISIONE SEPARAZIONE: Tel. 030 2680641 / 030 3582801 - Fax 030 3580517
    DIVISIONE SOLLEVAMENTO: Tel. 030 3580375 / 030 3580696 - Fax 030 3580846
    CISQ/IMQ/CSQ 9190.GAUS - UNI EN ISO 9001:2008
    Cap. Soc. e 400.000,00 i.v. - P.I. e C.F. IT 03535610178 - REA: BS 414240 - R.I. BS 03535610178
    E-mail: info@gaussmagneti.it - www.gaussmagneti.it
    DIVISIONE SEPARAZIONE: Tel. 030 2680641 / 030 3582801 - Fax 030 3580517
    DIVISIONE SOLLEVAMENTO: Tel. 030 3580375 / 030 3580696 - Fax 030 3580846
    Several tenths of magnetic systems for billets handling has been sold all over the world.

  • Handling of bundles
    Electromagnets for bundles handling....

  • GAUSS MAGNETI designs and manufactures since 1972 special deep
    field electromagnets for bundles designed according to the customer’s
    requirements for in-plant handling.
    They are mainly used for the following applications:
    • Bundles unloading from production (also for hot material up
    to 600°C);
    • Loading and unloading of lorries, rail containers, ships;
    • Storage in warehouse or depots.
    These electromagnets are different from those for flat
    products because of their deeper magnetic field, able to
    better support non compact and irregular shaped loads.
    Due to their design these magnets are suitable to operate at
    high temperature. In fact the special thermal insulation and
    the double bottom plate hamper that the heat from the load
    reaches the coil assuring then the highest electromagnets
    reliability.
    Magnets can be supplied with lockable and retractable mobile
    poles for the picking of single pieces or small quantities.
    Magnets can be executed for the simultaneous handling of
    one or more bundles or packs.
    The main advantages are:
    • Operators can stay away from the hot material avoiding risk of accidents;
    • Operators don’t have to climb over the piles to slinging the load
    dramatically increasing the handling safety level and reducing the
    cost of the personnel;
    • No damage to the material due to handling with mechanical
    lifting systems;
    • Faster handling speed with handling cost reduction;
    • Better use of the storage areas with the increasing the
    available space.

    The magnets can be used individually or combined under a beam.
    These can be:
    • Fixed or extendable to adapt to the different load length;
    • Provided with safety mechanical forks;
    • Special execution with cross movement of magnets for the picking of one or
    more packs or bundles;
    • Provided with magnets motorized rotation for the picking of one or two packs
    or bundles.
    The electromagnets are fed:
    • From the mains through our electronic equipment with 4-quadrants
    digital converter allowing magnetic flux setting, counter-excitation
    for fast load release, coil temperature control by means of
    thermal probes or amperometric relays (important in hightemperature
    magnets);
    • In case of power failure, from lead or Ni-Cd batteries with
    automatic switching and charging system and continuous
    control of the battery charge condition.
    Electronic equipments are provided with excitation time
    monitoring to avoid coil overheating.


    Hundreds of magnetic systems for bundles
    handling has been sold all over the world.

  • Plate and packs handling
    Electromagnets and electropermanent magnets for plates and packs handling...

  • GAUSS MAGNETI designs and manufactures since 1972 special rectangular
    electromagnets for plates and packs, keeping into account the customer strong
    requirements for optimal managing of the available space in
    plant, for high movements speed and for possibility to handle
    one or more plates at the same time
    They are mainly used for the following applications:
    • Unloading of plates from production line (also hot materials
    up to 600°C);
    • Loading and unloading of lorries, rail containers, ships;
    • Stocking in stores or warehouses;
    • Loading and unloading of cut plates.
    The careful study of the magnetic field lines allows handling
    single and multiple plates, depending on the operator’s
    need, granting also the highest efficiency and safety during
    transport.
    Safety is achieved not only by using a high magnetic force, but
    also by a correct load arrangement under a sufficient magnets
    number, depending on the bending of the load itself.
    Special versions for high temperature materials (up to 600°C)
    are also available.
    Main technical features of our electromagnets are:
    • No needs of wood spacers between the bundles;
    • No damage to the material due to handling with mechanical lifting systems;
    • No aisles required between plate stacks;
    • No need to limit the stack height to that of a man;
    • Faster handling speed with handling cost reduction;
    • Reduction of risks for personnel due to remote handling
    controls;
    • Better use of the storage areas by increasing available
    space.
    • Possibility of vertical sheet metal thanks to special
    execution.

    The magnets can be used individually, multiple under a fixed
    or an extensible beam allowing the magnets distance to be
    adjusted according to the plates dimensions.
    These electromagnets can also be used for handling packs
    with iron hoops able to stand the load.
    The electromagnets are fed:
    • from the mains through our electronic equipment with
    4-quadrants digital converter allowing magnetic flux setting,
    counter-excitation for fast load release, coil temperature
    control by means of thresholds (important in high-temperature
    magnets), automatic switching to batteries, buffer batteries
    (Pb or Ni-Cd), automatic battery charging system and
    continuous control of the batteries charge condition.
    Gauss Magneti has also successfully developed
    the electropermanent magnets technology.
    Electropermanent magnets hold their magnetization
    also in case of mains failure or cable break, so they
    do not need buffer batteries or mechanical safety
    forks.
    Their peculiarity lies in that they are activated by
    a current pulse lasting few seconds and that they
    hold their magnetization till a second current pulse
    – opposite the first one – deactivates them.
    Besides the obvious advantage of handling safety,
    they also assure the highest reliability being actually
    exempt from internal Joule heating.
    Coming on the market of high performance magnetic
    materials has also allowed for electropermanent magnets a weight
    and dimensions reduction preserving the same capacity.
    Thanks to Gauss Magneti technology, plates thinning is possible
    also with electropermanent magnets both manually by the operator
    and automatically by means of PLC.
    Special versions for high temperature materials (up to 600°C) are
    also available.
    At last they can be used individually or combined under a beam.

  • Handling of materials for forges
    Electromagnets and electro-permanent magnets for ingots, round and square bars....

  • GAUSS MAGNETI designs and manufactures since 1972 special
    electromagnets for slabs, ingots and round bars according to the
    customer’s requirements for in- and out -plant handling.
    They are mainly used for the following applications:
    • Internal handling and feeding of cutting machines (also
    for hot material up to 650°C);
    • Loading and unloading of lorries, rail containers, ships;
    • Storage in warehouse or depots.
    Due to their design these magnets are suitable to operate
    at high temperature. In fact the special thermal insulation
    and the double bottom plate hamper that the heat from
    the load reaches the coil assuring then the highest
    electromagnets reliability.
    The particular coil design and the very low current density
    allow handling of materials at temperature up to 650°C.
    The electromagnets can be made also with double
    redundant coils so that in case one of the coils or the
    feeding cable breaks the remaining coil can hold the load
    safely.
    The main advantages are:
    • The operators can stay away from the hot material avoiding risk of
    accidents;
    • The operators do not have to climb over the piles to sling the load
    dramatically increasing the handling safety level and reducing
    the cost of the personnel;
    • No damage to the material due to handling with mechanical
    lifting systems;
    • Faster handling speed with handling cost reduction;
    • Better use of the storage areas with the increasing the
    available space.

    The electromagnets are fed:
    • From the mains through our electronic equipment with
    4-quadrants digital converter allowing magnetic flux setting,
    counter-excitation for fast load release, coil temperature control by
    means of thermal probes or amperometric relays (important in hightemperature
    magnets),
    • In case of power failure, from lead or Ni-Cd batteries with automatic
    switching and charging system and continuous control of the battery
    charge condition.
    Gauss Magneti has also successfully developed the electropermanent
    magnets technology. Electropermanent magnets hold their
    magnetization also in case of mains failure or cable break, so they
    do not need buffer batteries or mechanical safety forks.
    Their peculiarity lies in that they are activated by a current
    pulse lasting few seconds and that they hold their
    magnetization till a second current pulse - opposite the first
    one - deactivates them.
    Beside the obvious advantage of handling safety, they
    also assure the highest reliability being actually exempt
    from internal Joule heating.
    Coming on the market of high performance magnetic
    materials has also allowed in electropermanent magnets
    a weight and dimensions reduction preserving the same
    capacity.
    Also for electropermanent magnets Gauss Magneti offers
    special versions able to handle high temperature materials
    (up to 600°C).
    Electro permanents combine the benefits of both electro and
    permanent magnet technology with the following advantage:
    • Safety: No accidental release of the load due to power failure or electric
    cable damage. They do not need buffer batteries or mechanical safety
    forks.
    • Performance: They also assure constant performances being actually
    exempt from internal Joule heating.
    • Reduced wear: Very low maintenance.
    • Environmentally friendly: No emergency batteries needed.

    Several tenths of magnetic systems for forges has been sold all over the world.

  • Handling of wire rod coils
    Electromagnets for wire rod coils...

  • GAUSS MAGNETI designs and manufactures since 1972 special deep
    field electromagnets for wire rod coils designed according to the
    customer’s requirements for in-plant handling.
    They are mainly used for the following applications:
    • Single or multiple wire rod coils unloading from
    production (also for hot material up to 600°C);
    • Loading and unloading of lorries, rail containers,
    ships;
    • Storage in warehouse or depots.
    These electromagnets are different from those for flat
    products because of their deeper magnetic field , able
    to better support non compact and irregular shaped
    loads.
    Due to their design these magnets are suitable to operate
    at high temperature. In fact the special thermal insulation
    and the double bottom plate hamper that the heat from
    the load reaches the coil assuring then the highest
    electromagnets reliability.
    Magnets can be executed for the simultaneous handling of one or more
    wire rod coils.
    Magnets for wire rod coils could be handled in horizontal or
    vertical eye.

    The main advantages are:
    • Operators can stay away from the hot material avoiding risk of
    accidents;
    • Operators don’t have to climb over the piles to slinging the load
    dramatically increasing the handling safety level and reducing the
    cost of the personnel;
    • No damage to the material due to handling with mechanical lifting
    systems;
    • Faster handling speed with handling cost reduction;
    • Better use of the storage areas with the increasing the
    available space.
    The electromagnets are fed:
    • From the mains through our electronic equipment with
    4-quadrants digital converter allowing magnetic flux
    setting, counter-excitation for fast load release, coil
    temperature control by means of thermal probes or
    amperometric relays (important in high-temperature
    magnets),
    • In case of power failure, from lead or Ni-Cd batteries
    with automatic switching and charging system and
    continuous control of the battery charge condition.
    Electronic equipments are provided with excitation time
    monitoring to avoid coil overheating.


    Tenths of magnetic systems for wire rod coils handling has been sold all over the world.

For Technical Support with this webpage, please contact support.

If you have questions about Exhibiting or Sponsoring AISTech please contact sales@aist.org