G.W. Becker, Inc.

Hermitage,  PA 
United States
http://www.gwbcrane.com
  • Booth: 350


Your Single Source for Overhead Crane Products & Solutions.

Profile

G.W. Becker, Inc. is a full service, single source, provider of choice for quality overhead crane products & solutions. Family owned since 1980, we have grown from a local overhead crane parts supplier to a recognized industry leader offering a full spectrum of overhead crane products & services throughout North America, including: manufacturing of custom overhead cranes to CMAA specifications or AIST Technical Report No. 6, packaged crane equipment, workstations, jibs, hoists, OSHA & maintenance inspections with PM, field service & repair, component rebuilds, operator & maintenance training, runway surveys & inspections, engineering analysis, design engineering, modernizations, automation control & integration, and turnkey installation, as well as parts distribution. G.W. Becker Inc. provides specialized expertise and long-term planning solutions for the unique challenges of maintaining overhead crane equipment.

Brands: G.W. Becker, Inc., Yale, Shaw-Box, Budgit, Coffing, CM, R&M, Detroit, ACCO, Louden, Gorbel, Conductix, Duct-O-Wire, Gleason Reel, Hubbell, EC&M, Cutler-Hammer, Magnetek, Power Electronics, Caldwell, Crosby, Cattron, Remtron, Femco, and more....


 Products

  • Overhead Cranes
    Custom designed and engineered to meet your lifting requirements............

  • G.W. Becker, Inc. commissioned a new 110/30 ton electric overhead traveling hot metal ladle crane for a steel producer in Pennsylvania.  This new crane is replacement of an antiquated unit in the customer’s teeming aisle.  This high-speed, 230 VDC, 4-motion continuous severe service EOT crane was designed to be installed on an existing runway system of 58’ span and 55’ of lift.  This mill duty crane has an eight (8) wheel bridge design with equalizing end trucks and end ties with yokes and bogey pins, A-5 type bridge drive with foot mounted parallel shaft reducers with foot mounted drives, high temp wiring and motors for high ambient temperature range of 32 F to 140 F.  Main hoist designed with interlocked dual drums and synchronized worm gear drives reeved into common ladle hanger. This turnkey project included the new EOT crane, upgrading runway electrification and supervision of installation to meet all current applicable CMAA, OSHA, ANSI/ASME, and NEC specifications.
  • Gantry Cranes
    Custom designed and engineered to meet your lifting requirements.............

  • G.W. Becker, Inc. commissioned a new heavy service 65/30 ton outdoor gantry crane for a ship building and repair facility in Tennessee. This turnkey project entailed repurposing an existing 85/30 ton top running double girder overhead crane and modifying it to a 65/30 ton double legged gantry.  We worked closely with the customer to re-use an existing asset for their desired application.   We designed and fabricated four (4) new gantry legs, new gantry leg bracing and sills, and new girder end ties.  To gain access to the elevated cab, we designed and manufactured new ladder access from the ground to the bridge footwalk.  We fabricated an enclosed cab with mini-master controls, attaching the cab to one end of the 103’ span bridge. To prevent unwarranted crane operation during high winds, we provided and installed a wind velocity activated rail clamp system.  Rail clamp system included wind velocity activated switch, rail clamps and hydraulics.  G.W. Becker, Inc. provided all materials, labor, equipment and supervision for installing the gantry crane.
  • Complete Crane Systems
    Complete systems designed and engineered to meet your lifting requirements.............

  • G.W. Becker, Inc. commissioned 28 overhead cranes for a new multi-unit facility consisting of 100' span, top running double girder and single girder monobox cranes in 10 and 15 ton capacities; along with 2-5 ton capacity single girder cranes and partial freestanding runways to service workstations. 

    This turnkey project included the new EOT cranes, runway design & manufacturing, runway electrification, and self-performing installation to meet all current applicable CMAA, OSHA, ANSI/ASME, and NEC specifications.

  • Top Running Trolley Hoists
    Designed for CMAA Class ‘D’ & ‘E’ Service, with capacities up to 75 tons.............

  • GWBI  Top Running Wire Rope Hoist

     

    Designed for CMAA Class ‘D’ & ‘E’ Service, with capacities up to 75 tons.

     

    The GWBI wire rope hoist is a precision built-up style hoist in a pre-engineered package platform.  Designed per CMAA Specifications for crane builders and end users that value a heavier & rugged unit, our top running double girder hoist is customizable in gauge, lift, speed. 

     

    The leading feature is our powerful gear case.  This is not your typical “off-the-shelf” unit.  Our G.W. Becker, Inc. designed and manufactured gear case provides the performance and reliability your lifting applications demand.

     

    Engineered with standardized componentry, our GWBI hoist provides lower cost of ownership and ease of replacement for wear items.

  • End Trucks
    GWBI Top-Running Tube Frame Rotating Axle End Trucks ............

  • GWBI Top-Running Tube Frame

    Rotating Axle End Trucks

     

    Designed up through CMAA Class ‘E’ Service

     

    The GWBI Top-Running Rotating Axle End Trucks are available in a wide range of capacities, configurations for single, bogie & double girder, and are designed for crane builders and end users that value heavier & rugged crane components. 

For Technical Support with this webpage, please contact support.

If you have questions about Exhibiting or Sponsoring AISTech please contact sales@aist.org